Robomow RK2000 User Manual

76 77
Periodic
maintenance
6
Every couple of weeks
• Inspect the underside of the mower. Clean every couple of weeks if
necessary. Carefully scrape the collected grass debris (using a small
stick or similar object) from under the mowing deck.
• Check the Perimeter Wire and add pegs where it is loose and not tight to
the ground. In case of seasonal changes in the lawn, make sure to adjust
the wire accordingly.
• Inspect the Base Station, clean it from mud and debris to allow proper
docking.
WARNING
Severe injury and damage hazard!
Always remove the disabling device and power the mower o before
lifting the mower. Blades are very sharp. They can cause severe cuts
or lacerations. Always wear heavy work gloves when working with or
around the blades. NEVER use a damaged or broken blade.
IMPORTANT!
NEVER use high pressure water to clean the mower.
Liquids can damage components. Use only a damp or wet
cloth to wipe the surface clean after scraping.

Robomow RK2000 Specifications

General

Type	Robotic lawn mower
Motor type	Brushless
Noise level	60 dB
Cutting width	210 mm
Product color	Black, Red, Turquoise
Number of zones	2
Number of wheels	3 wheel(s)
Maximum lawn area	2000 m²
Mulching function	-
Multi-Zone capability	Yes
Maximum cutting height	1000 mm
Minimum cutting height	200 mm
Suitable for slope up to	45 %
Battery type	Built-in battery
Power source	Battery
Charging time	2 h
Battery voltage	18.15 V
Battery capacity	4.9 Ah
Battery life (max)	120 min
Battery life (min)	100 min
Repairability index	8