Name: Robomow RK2000
Brand: Robomow
Rating: 4 (1 reviews)

To Next Page

To Previous Page

52 53

D. Rough or challenging terrain

If you see areas where the mower appears to have limited traction

or is otherwise struggling to maneuver accurately, you should likely

adjust the wire around these areas. Very loose or sandy soil, rocky

or rooted terrain, and/or highly uneven surfaces can increase the

chances of your mower getting stuck and not reliably making it

back to the Base Station to charge every time. Areas that are very

challenging in dry conditions are likely to become much more so after

heavy rainfall.

3) To test any adjustments you make to the wire, simply press the stop

control and carry the mower to a location on the wire aprox. 3m before

the area that was adjusted. Send it Home again. Repeat this process as

many times per location and on as many locations as necessary until

you are happy with how it navigates the entire perimeter.

4) Once the mower has made it all the way around the perimeter it will

dock inside the Base Station.

5) Remove the disabling device as you complete the next section.

6) Secure the wire section.

7) Re-install the disabling device.

8) WELL DONE!!

Other manuals for Robomow RK2000

Questions and Answers:

Need help?

Do you have a question about the Robomow RK2000 and is the answer not in the manual?

General