Rocket Espresso Boxer Series User Manual

_____________________________________________________________________________________________
© Rocket Espresso Ltd. Boxer series. User Manual Ed. 08.2015. Specifications subject to change without notice.. Page 10
Start up
We assume the machine has been properly installed.
1.) Open the water tap and switch on the main electrical switch (both not
included to delivery).
Fig. 2
Indicator light 1: Machine is on
Indicator light 2: Boiler is filled
Indicator light 3: Boiler is filling water
2.) Turn the on/off switch (Fig. 1 -10) from position “0” to position “1”.
The indicator lights (Fig. 2-1) and (Fig. 2-3) come on.
3.) Wait until the indicator light (Fig. 2-3) goes off and the light (Fig. 2-2) goes
on. The boiler is filled with water.
4.) Now turn the main switch (Fig. 1-10) to position “2” to turn the heater on.
5.) Wait till the boiler pressure has reached the working pressure (0.9 bar
approx). You can read the boiler pressure on the boiler pressure scale
(0-3 Bar) of the pressure gauge (Fig. 1-3).
6.) Open the steam handle (Fig. 1-1) for some seconds and then close it. Hot
steam is dispensed from the steam wand (Fig. 1-4). Caution!
This operation avoids milk resuction into the boiler. Wait till the working
pressure has been reached again .
Your machine is now ready to work.

Rocket Espresso Boxer Series Specifications

General

Brand	Rocket Espresso
Model	Boxer Series
Category	Coffee Maker
Language	English