9VR
WATER RESERVOIR
1.
Remove and clean the water reservoir periodically with warm
soapy water. To remove the reservoir, take off the reservoir
cover and lift the reservoir up by the two black handles – a firm
upwards movement.
2.
When returning the reservoir, ensure you press down firmly so
that the tank plug at the bottom is fully engaged.
3.
Use fresh, filtered water to fill the reservoir. Do not use distilled
water.
DRIP TRAY
1. Remove the drip tray and wash with hot soapy water. Rinse, dry and return.
BODYWORK
1. Wipe the stainless steel surfaces with a soft, non-abrasive and damp
cloth. Polish using a dry, soft cloth. The Rocket Espresso supplied stainless
steel cloth is best for the cleaning of your machine body work. We do not
recommend using any of the commercial stainless steel cleaners.
DESCALING
1.
Rocket Espresso do not recommend descaling your espresso
machine.
2.
Many of the chemicals used to descale espresso machines are
particularly aggressive. These chemicals can cause internal
corrosion of hard metals used in the construction of the machine.
3.
Additionally it is very difficult to remove all the descaling solution
from the machine once the procedure is completed.
4.
Control the quality of the water you use in the machine, always
using a filtered water. Distilled water may lack the necessary
conductivity required for various electronic functions needed in
the operation of the machine.
5.
Additionally where possible try to use the Rocket Espresso
reservoir filter.
To Next Page
Loading...
Need help?
General
