14 Logic Module, Internal CompactFlash, and RAM
Publication 2711P-IN004J-EN-P - September 2009
7. If reusing the memory in the new logic module:
• remove the RAM and CompactFlash from the logic module.
• insert the RAM and CompactFlash in the new logic module.
To verify component compatibility, refer to the tables on page 5 and 6
.
8. Install the new or used logic module.
9. Install the communication module, if necessary.
Additional Resources
For additional information on the PanelView Plus and PanelView Plus CE terminals, refer to
these publications.
You can view or download publications at http://literature.rockwellautomation.com
. To
order paper copies of technical documentation, contact your local Rockwell Automation
distributor or sales representative.
Resource Description
PanelView Plus User Manual, publication
2711P-UM001
Provides an overview of the PanelView Plus and PanelView
Plus CE terminals and gives information on how to install,
operate, configure, and troubleshoot these devices.
PanelView Plus Terminals and Display
Modules Installation Instructions, publication
2711P-IN001
Provides specific guidelines and procedures on how to install
PanelView Plus, PanelView Plus CE terminals, and display
modules in a panel.
High-bright Display Modules Installation
Instructions, publication 2711P-IN026
Provides specific guidelines and procedures on how to install
a high-bright display module to a PanelView Plus or
PanelView Plus CE terminal in outdoor environments.
Wiring and Grounding Guidelines for
PanelView Plus Devices Technical Data,
publication 2711P-TD001
Provides additional grounding and wiring guidelines for
PanelView Plus and PanelView Plus CE terminals.
www.aotewell.com sales04@aotewell.com
To Next Page
Loading...
Need help?
General
