Rockwell Automation CompactLogix series User Manual

CompactLogix Controllers 13
Publication
1768-IN004D-EN-P - December 2009
4. Attach the end cap by using the tongue and groove slots (a)
and locking the bus lever (b).
Confirm the Installation
After you have installed the controller and applied power, check that
the PWR and I/O PWR status indicators are solid green.
If the indicators are in any other state, see Troubleshoot System
Power on page 28.
a.
b.
a.
Power
OUT
L1
L2/N

Rockwell Automation CompactLogix series Specifications

General

Brand	Rockwell Automation
Model	CompactLogix series
Category	Controller
Language	English