EasyManuals Logo
Home>Rockwell Automation>Controller>CompactLogix series

Rockwell Automation CompactLogix series User Manual

Rockwell Automation CompactLogix series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
CompactLogix Controllers 9
Publication
1768-IN004D-EN-P - December 2009
Up to eight 1769 Compact I/O modules can reside on each
side of a 1769 power supply in a remote bank. Consult the
module’s specifications for its distance rating.
The type of controller determines the maximum number of
1768 modules that can reside in the local bank and the
maximum number of 1769 I/O modules that can reside in one
local and up to two remote banks.
Install the Controller
Follow these steps to install your controller.
1. Mount the controller to a panel or on a DIN rail.
2. Confirm the installation.
3. Connect the controller.
4. Configure a serial or Ethernet driver.
5. Install a CompactFlash card (optional).
6. Download and install controller firmware.
IMPORTANT
Never place a 1769 power supply in a local bank with a 1768
controller or a major fault will occur.
Controller Max Local 1768
Modules
Max 1769 I/O Modules
(local and remote)
1768-L43, 1768-L43S 2 16
1768-L45, 1768-L45S 4 30
IMPORTANT
Do not use screws if using a DIN rail to mount the controller. You can
break the mounting tabs if you screw the controller to a panel while it
is on a DIN rail.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rockwell Automation CompactLogix series and is the answer not in the manual?

Rockwell Automation CompactLogix series Specifications

General IconGeneral
BrandRockwell Automation
ModelCompactLogix series
CategoryController
LanguageEnglish

Related product manuals