1-8
Document: 553632
(ICSTT-RM448_EN_P) Issue: 08:
System Build Manual (AADvance Controller)
Physical Features
Physical FeaturesPhysical Features
Physical Features
An innovative feature of the AADvance controller is the design of the hardware.
Everything fits together easily without any need for inter-module wiring.
Environmental Specification
Environmental SpecificationEnvironmental Specification
Environmental Specification
The following environmental specification defines the minimum recommended
environmental conditions for an AADvance controller installation. Additional
conditions apply to installations in a Hazardous environment.
Table 1:
Table 1: Table 1:
Table 1: Environmental Specification
Environmental SpecificationEnvironmental Specification
Environmental Specification
Attribute Value
Operating Temperature Range:
For use in a Hazardous Environments (see
UL508 certification)
I/O Modules and Assemblies
For use in Non-hazardous environments (see
TUV Certification)
Processor Modules, I/O modules and
Assemblies
–25 °C to 60 °C (–13 °F to 140 °F)
–25 °C to 70 °C (–13 °F to 158 °F)
–25 °C to 70 °C (–13 °F to 158 °F)
Storage and Transport Temperature –40 °C to 85 °C (–40 °F to 185 °F)
Module Surface Temperature (during normal
operation)
43° C (109 °F) ± 2 °C
Humidity
Operating 10% to 95% RH, non-condensing
Storage and Transport 10% to 95% RH, non-condensing
Vibration
Functional Stress 5Hz to 9Hz
Continuous 1.7mm amplitude
Occasional 3.5mm amplitude
Withstand 10Hz to 150Hz
Acceleration 0.1g in 3 axes
Endurance 10Hz to 150Hz
Acceleration 0.5g in 3 axes
Shock 15g peak, 11ms duration, ½ sine
Altitude
To Next Page
Loading...
Need help?
General
