EasyManuals Logo
Home>Rockwell Automation>Controller>ics triplex AADvance

Rockwell Automation ics triplex AADvance User Manual

Rockwell Automation ics triplex AADvance
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
2-10
Document: 553632
(ICSTT-RM448_EN_P) Issue: 08:
System Build Manual (AADvance Controller)
Total:
Note: All figures given are worst-case estimates based upon maximum operating field
current and voltages.
Estimate AADvance Controller Weight
Estimate AADvance Controller WeightEstimate AADvance Controller Weight
Estimate AADvance Controller Weight
Use the following table to estimate the weight of your system.
Table 4:
Table 4: Table 4:
Table 4: AADvance Controller Module Weight
AADvance Controller Module WeightAADvance Controller Module Weight
AADvance Controller Module Weight
Item
Number
Used
Weight Allowance
g (oz.)
Subtotal
T9100 Processor Base Unit
× 460g (16 oz.)
T9110 Processor Module
× 430g (15oz)
T9401 Digital input module, 24V dc, 8 channel
× 280g (10oz)
T9402 Digital input module, 24V dc, 16 channel
× 340g (12oz)
T9431 Analogue input module, 8 channel
× 280g (10oz)
T9432 Analogue input module, 16 channel
× 340g (12oz)
T9451 Digital output module, 24V dc, 8 channel
× 340g (12oz)
T9482 Analogue output module, 8 channel
× 290g (10.5oz)
T9300 I/O base unit (3 way)
× 133g (5 oz.)
T98x1 Simplex Termination assembly
× 133g (5 oz.)
T98x2 Dual Termination Assembly
× 260g (10oz)
T98x3 Triple Termination Assembly
× 360g (13oz)
T9310 Expansion cable assembly and 2m cable
× 670g (24 oz.)
T9841 Termination Assemblies (average weight)
× 175g (6 oz.)
Total estimated controller weight
Estimating Centre of Gravity Information
Estimating Centre of Gravity InformationEstimating Centre of Gravity Information
Estimating Centre of Gravity Information
If it is necessary to calculate the location of the centre of gravity of an AADvance
controller destined for a maritime or other shock-mounted application, it is reasonable
to assume the centre of gravity of each assembly of modules and their base unit is at
the geometric centre of the assembly.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rockwell Automation ics triplex AADvance and is the answer not in the manual?

Rockwell Automation ics triplex AADvance Specifications

General IconGeneral
BrandRockwell Automation
Modelics triplex AADvance
CategoryController
LanguageEnglish

Related product manuals