Rockwell Automation ics triplex AADvance User Manual

3-30 Document: 553632
(ICSTT-RM448_EN_P) Issue: 08:
System Build Manual (AADvance Controller)
 Secure the socket assembly by inserting the two M3 socket cap screws.
 Tighten the screws with a 2.5mm Allen key.
 Install the cable to the socket assembly and tighten the retaining screws by
hand.
2) Insert the free end of the expansion cable into a right hand socket of a T9300 I/O
base unit.
 Insert a cable plug assembly into into the right hand socket of the processor or
I/O base unit.
 Secure the plug assembly by inserting the two M3 socket cap screws.
 Tighten the screws with a 2.5mm Allen key.
 Install the cable to the plug assembly and tighten the retaining screws by hand.
Connect Between a T9300 I/O
Connect Between a T9300 I/OConnect Between a T9300 I/O
Connect Between a T9300 I/O Base Unit and a T9300 I/O Base Unit
Base Unit and a T9300 I/O Base UnitBase Unit and a T9300 I/O Base Unit
Base Unit and a T9300 I/O Base Unit
1) Connect the expansion cable between a T9100 processor base unit (or a T9300
I/O Base unit) to a T9300 I/O base unit.
 Insert a cable plug assembly into into the right hand socket of the processor or
I/O base unit.
 Secure the plug assembly by inserting the two M3 socket cap screws.

Rockwell Automation ics triplex AADvance Specifications

General

Brand	Rockwell Automation
Model	ics triplex AADvance
Category	Controller
Language	English