88
WARNING
Concerning the Auto O function
The power to this unit will be
turned o automatically after a
predetermined amount of time
has passed since it was last used
for playing music, or its buttons
or controls were operated (Auto O function).
If you do not want the power to be turned
o automatically, disengage the Auto O
function (p. 5).
Use only the supplied AC adaptor and
the correct voltage
Be sure to use only the AC
adaptor supplied with the unit.
Also, make sure the line voltage
at the installation matches the
input voltage specied on the
AC adaptor’s body. Other AC adaptors may
use a dierent polarity, or be designed for a
dierent voltage, so their use could result in
damage, malfunction, or electric shock.
WARNING
Use only the supplied power cord
Use only the attached power
cord. Also, the supplied power
cord must not be used with any
other device.
CAUTION
Cautions when moving this unit
If you need to move the
instrument, take note of the
precautions listed below. At
least two persons are required
to safely lift and move the unit.
It should be handled carefully, all the while
keeping it level. Make sure to have a rm
grip, to protect yourself from injury and the
instrument from damage.
¹ Check to make sure the knob bolts
securing the unit to the stand have
not become loose. Fasten them again
securely whenever you notice any
loosening.
¹ Disconnect the power cord.
¹ Disconnect all cords coming from
external devices.
¹ Remove the music rest.
CAUTION
Keep small items out of the reach of
children
To prevent accidental ingestion
of the parts listed below, always
keep them out of the reach of
small children.
¹ Accessories
Screws for mounting onto the stand
USING THE UNIT SAFELY
IMPORTANT NOTES
Power Supply
¹ Place the AC adaptor so the side with
the indicator faces upwards. The
indicator will light when you plug the
AC adaptor into an AC outlet.
Placement
¹ Do not allow objects to remain on top
of the keyboard. This can be the cause
of malfunction, such as keys ceasing to
produce sound.
¹ Depending on the material and
temperature of the surface on which
you place the unit, its rubber feet may
discolor or mar the surface.
Care of the Keyboard
¹ Do not write on the keyboard with
any pen or other implement, and
do not stamp or place any marking
on the instrument. Ink will seep
into the surface lines and become
unremovable.
¹ Do not ax stickers on the keyboard.
You may be unable to remove stickers
that use strong adhesives, and the
adhesive may cause discoloration.
¹ To remove stubborn dirt, use a
commercially available keyboard
cleaner that does not contain abrasives.
Start by wiping lightly. If the dirt does
not come o, wipe using gradually
increasing amounts of pressure while
taking care not to scratch the keys.
Repairs and Data
¹ Before sending the unit away for
repairs, be sure to make a backup of
the data stored within it; or you may
prefer to write down the needed
information. Although we will do our
utmost to preserve the data stored in
your unit when we carry out repairs,
in some cases, such as when the
memory section is physically damaged,
restoration of the stored content may
be impossible. Roland assumes no
liability concerning the restoration of
any stored content that has been lost.
Additional Precautions
¹ Any data stored within the unit can be
lost as the result of equipment failure,
incorrect operation, etc. To protect
yourself against the irretrievable loss of
data, be sure to make a backup of the
data stored within it; or you may prefer
to write down the needed information.
¹ Roland assumes no liability concerning
the restoration of any stored content
that has been lost.
¹ Never strike or apply strong pressure to
the display.
¹ The sound of keys being struck and
vibrations produced by playing an
instrument can be transmitted through
a oor or wall to an unexpected
extent. Please take care not to cause
annoyance to others nearby.
¹ Do not apply undue force to the music
rest while it is in use.
¹ Do not use connection cables that
contain a built-in resistor.
Using External Memories
¹ Please observe the following
precautions when handling external
memory devices. Also, make sure to
carefully observe all the precautions
that were supplied with the external
memory device.
¹ Do not remove the device while
reading/writing is in progress.
¹ To prevent damage from static
electricity, discharge all static
electricity from your person before
handling the device.
Caution Regarding Radio Frequency
Emissions
¹ The following actions may subject you
to penalty of law.
¹ Disassembling or modifying this
device.
¹ Removing the certication label
axed to the back of this device.
¹ Using this device in a country other
than where it was purchased
Intellectual Property Right
¹ It is forbidden by law to make an audio
recording, video recording, copy or
revision of a third party’s copyrighted
work (musical work, video work,
broadcast, live performance, or other
work), whether in whole or in part,
and distribute, sell, lease, perform or
broadcast it without the permission of
the copyright owner.
¹ Do not use this product for purposes
that could infringe on a copyright
held by a third party. We assume no
responsibility whatsoever with regard
to any infringements of third-party
copyrights arising through your use of
this product.
¹ The copyright of content in this product
(the sound waveform data, style data,
accompaniment patterns, phrase data,
audio loops and image data) is reserved
by Roland Corporation.
¹ Purchasers of this product are permitted
to utilize said content (except song data
such as Demo Songs) for the creating,
performing, recording and distributing
original musical works.
¹ Purchasers of this product are NOT
permitted to extract said content
in original or modied form, for the
purpose of distributing recorded
medium of said content or making
them available on a computer network.
¹ This product contains eParts integrated
software platform of eSOL Co.,Ltd.
eParts is a trademark of eSOL Co., Ltd.
in Japan.
¹ The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Roland is under license.
¹ This Product uses the Source Code of
μT-Kernel under T-License 2.0 granted
by the T-Engine Forum (www.tron.org).
¹ This product includes third party open
source software.
Copyright © 2006-2019 Arm Limited. All rights
reserved.
Copyright © 2018 STMicroelectronics. All rights
reserved.
Licensed under the Apache License, Version 2.0
(the “License”);
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Copyright © 2018 STMicroelectronics. All rights
reserved.
This software component is licensed by ST
under BSD 3-Clause license, the “License”;
You may obtain a copy of the License at
https://opensource.org/licenses/BSD-3-Clause
This product uses source code from the
Jansson (http://www.digip.org/jansson/)
library.
Copyright © 2009-2016 Petri L
ehtinen <petri@
digip.org> Released under the MIT license
http://opensource.org/licenses/mit-license.php
¹ Roland, SuperNATURAL are either
registered trademarks or trademarks of
Roland Corporation in the United States
and/or other countries.
¹ Company names and product names
appearing in this document are
registered trademarks or trademarks of
their respective owners.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
