25
Performing
The HP203 features over 300 different internal sounds, allowing you to enjoy performing
with sounds suitable for many different types of music.
These onboard sounds are called “Tones.” The Tones are divided into six different
groups, each of which is assigned to a different Tone button.
The Tone “Grand Piano 1” is selected when the instrument’s power is turned on.
fig.Panel-Tones-e.eps
1.
Press a Tone button to select a tone group.
You’ll hear the Tone assigned to Tone number 1 in the selected Tone Group. Try fingering the
keyboard.
The display will indicate the number of the currently selected tone.
fig.d-1.eps
2.
Use the [-] [+] buttons to select a sound from the tone group.
The Tone you’ve selected is heard when you finger the keyboard.
The next time you select this Tone button, you’ll hear the tone you selected here.
fig.d-5.eps
If you don’t perform any operation for a while, the indication in the display will change
to the following.
About the Tone, refer to “Tone List” (p. 88).
For some sounds, there are keys that do not produce sound.
Performing with a Variety of Sounds
NOTE
HP203_e.book 25 ページ ２００６年１２月８日 金曜日 午前９時３３分
To Next Page
Loading...
Need help?
General
