Now you can access these samples from the patch list (“User Sample” and
“Card Sample” groups), as well as insert them into the sequencer’s audio track
using it’s INSERT function.
Recording a song into an audio file
Right within the Juno-G, you can record your composition (or part of it)
into an AIFF or WAVE audio le (the Default File Type is set in the General →
Common system screen), and use it to burn an audio CD or share on the
Internet.
To record into an audio le, you need to have one free audio track and
perform the following operation:
1. Set the sequencer to the place you want to start recording from.
2. Press AUDIO TRACK.
3. Select a free audio track.
4. Set the Audio Rec Mode parameter to RE-SAMPLING:
5. Press PLAY.
6. Press STOP when you want to end recording.
7. In the newly-appeared menu, choose CANCEL.
8. The new recording will appear in sample edit mode.
9. Press WRITE, and save the le into the ash memory (USER or
CARD). Remember the number you saved the sample under(for
example, 0120).
11
To Next Page
Loading...
Need help?
General
