31
Turning the Power On/O
Once the connections have been completed (p. 30), turn on power to your various devices in the order
specied. By turning on devices in the wrong order, you risk causing malfunction and/or damage to
speakers and other devices.
Turning the Power On
1. Turn the [MAIN OUT] knob all the way to the left.
2. Switch on the power to any external equipment connected to the input jacks.
3. Press and hold the OCTA-CAPTURE’s [POWER] button until it lights.
This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is
required before the unit will operate normally.
4. Switch on the power to your amp or powered monitor speakers.
5. During playback, adjust the volume by turning the [MAIN OUT] knob toward the right.
Turning the Power O
Before you turn o the power, make sure to do the following.
• Turn the [MAIN OUT] knob all the way to the left
• Minimize the volume of all connected equipment
1. Switch o the power to your amp or powered monitor speakers.
2. Press and hold the OCTA-CAPTURE’s [POWER] button for one second, and then release
it.
Settings will be saved when you turn o the power. When you turn on the power, the OCTA-
CAPTURE will start up with the saved settings.
3. Switch o power to the connected equipment.
941
942
To Next Page
Loading...
Need help?
Audio Channels
