Roland SH-5 Service Manual

12-4-3 VCO-1, ru adjust
OSCILLOSCOPE
Adjust VR-304 for:
1:1
+10V
OV
Adjust VR-301 for:
98% •
100%
+10V
OV
12-4-4 VCO-1 FREQUENCY WIDTH
•Press F1 and adjust for some convenient reading (such as 100); call this "X". Check that F2 produces 2X;
F3 = 4X; and F4 = 8X.
If F4 is not within ±1 Hz., VCO WIDTH needs adjusting.
(VO-3)
VCO-1
WIDTH
(VR302)
<D
(OP-20)
| VCO-2
WIDTH
(VR403)
FREQUENCY COUNTER
-38-
Scan by Manual Manor
http://www.markglinsky.com/ManualManor.html

Roland SH-5 Specifications

General

Brand	Roland
Model	SH-5
Category	Synthesizer
Language	English