Roland SP-404SX User Manual

21
Deutsch Français Italiano Español Português NederlandsEnglish
Deleting a Sample
If you are not satis ed with the sound you sampled, use the following procedure to delete it, and then sample the sound again.
1. Press the [ DEL] button.
2. The display will indicate “dE L,” and the pads that can be deleted will blink.
Select a bank. Protected banks (p. 38) are indicated as
“
Pr t” and cannot be selected.
Pads that can be deleted will blink.
3. Press the pad that you want to delete.
The selected pad will change from blinking to lit.
You can select multiple pads.
4. Press the [DEL] button to delete the sample.
NOTE
Never turn o the power before the deletion is complete. When the deletion is complete, the “dAL” indication in the
display will disappear.

Roland SP-404SX Specifications

General

Display type	LED
Built-in display	Yes
Display number of characters	3
Bit rate	16 bit
Sample rate	44.1 kHz
Number of pads	13
Number of samples	120
Maximum polyphony (notes)	12
Battery type	AA
Battery voltage	9 V
Power source type	AC, Battery
Number of batteries supported	6
Compatible memory cards	SD
Included memory card size	1 GB

Weight and Dimensions

Depth	257 mm
Width	178 mm
Height	72 mm
Weight	1200 g