Roland V-Drums TD-02 User Manual

1010
Practicing in Coach Mode (COACH)
2. Strike the pad in time with the metronome.
The remaining time is shown in the lower right of the
screen.
ņ=121 1-4
ÓMAX260 3
* You cannot change the current tempo when using Auto
Up/Down.
* The current tempo value will be the lower tempo limit.
This ends when the specied time has elapsed, and the
strike timing is evaluated.
Finished! [EXIT]
SCORE:100
3. Press the [EXIT] button to nish.
AUTO UP/DOWN settings
Here you can specify the duration of your practice time, and
set the upper and lower tempo limits.
1. In the AUTO UP/DOWN screen, use
the [Í][Ë] buttons to select the item
(parameter) that you want to set.
2. Use the [–] [+] buttons to edit the value.
Parameter Value Explanation
Duration
Species the time.
1, 3, 5, 10, 15
MIN
Selects the duration (minutes) of
practice.
MaxTempo
21–260
(bpm)
Species the upper tempo limit.
* This can only be set to a
value higher than the current
tempo.
Tempo
20–260
(bpm)
Species the lower tempo limit.
3. Press the [ ] (DRUM KIT) button to return
to the DRUM KIT screen.
Playing Along with a Changing Rhythm
(CHANGE UP)
The rhythm type will change every two measures. Starting from
half notes, the note values will gradually become shorter, and will
then return to half notes; this change in rhythms will be repeated.
1. In the CHANGE UP screen, press the [ENTER]
button.
A two-measure count-in is played when you start.
MEMO
If you decide to stop mid-way through practice, press the
[EXIT] button.
2. Strike the pad in time with the metronome.
During practice, the screen shows the tempo and the
rhythm type. The remaining time is shown in the lower
right of the screen.
ņ=120 1-1
ņ 3
This ends when the specied time has elapsed, and the
strike timing is evaluated.
Finished! [EXIT]
SCORE:100
MEMO
You can change the metronome tempo by pressing the [-]
[+] buttons while you practice.
3. Press the [EXIT] button to nish.
CHANGE UP settings
Here’s how to specify the duration of your practice time and
the tempo.
1. In the CHANGE UP screen, use the [
Í
][
Ë
]
buttons to select the item (parameter) that
you want to set.
2. Use the [–] [+] buttons to edit the value.
Parameter Value Explanation
Duration
Species the time.
1, 3, 5, 10, 15 MIN
Selects the duration
(minutes) of practice.
Tempo
20–260 (bpm) Species the tempo.
3. Press the [ ] (DRUM KIT) button to return
to the DRUM KIT screen.

Roland V-Drums TD-02 Specifications

General

Type	Drum system
Crash cymbal	Yes
Number of pieces	1 pc(s)
Sample rate	44.1 kHz
USB ports quantity	1
Power source type	AC

Weight and Dimensions

Depth	1100 mm
Width	1000 mm
Height	1150 mm
Weight	12100 g