Ruijie Reyee RG-ES205GC-P User Manual

15
Configuration Guide
eWeb Configuration
3.4.3 Port Isolation
Port isolation implements layer-2 isolation of packets. After port isolation is enabled (which is disabled by default), data
can be forwarded only between uplink ports and downlink ports, and downlink ports cannot forward packets to each
other.
3.4.4 Static MAC
The Static MAC Address page is divided into two parts:
Adding a static MAC address:
Enter a valid MAC address and VLAN ID, select a port, and then click Add to add a static MAC address.
Displaying and deleting a static MAC address:
After a valid static MAC address is added, its information is displayed in the list below. Select a static MAC address and click
Delete to delete the static MAC address.
Up to 16 static MAC addresses can be added.
After
VLAN Settings
is set to
off
, no VLAN ID needs to be entered to add a static MAC address.
3.4.5 Search MAC
With the search MAC function, you can search for the MAC addresses learned by the device. MAC addresses can be fuzzily
searched. You can enter a part of a complete MAC address (such as 00:74:9c:1e:4b:f4) for searching.

Ruijie Reyee RG-ES205GC-P Specifications

General

Brand	Ruijie
Model	Reyee RG-ES205GC-P
Category	Switch
Language	English