Ryobi OJ1802 User Manual

6
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Direct Current Type of current
Alternating Current Type of current
n
0
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc. per minute
Safety Alert Precautions that involve your safety
Eye Protection Always wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.
Wet Conditions Alert Do not expose to rain or use in damp locations.
SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention
measures.
SYMBOL MEANING
DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
Important: Advises you of important information or instructions vital to the operation or maintenance of
the equipment.
Note: Advises you of additional information concerning the operation or maintenance of the equipment.

Ryobi OJ1802 Specifications

General

Model	OJ1802
Type	Jigsaw
Power Source	Corded Electric
Voltage	120V
Variable Speed	Yes
Orbital Action	Yes
Blade Type	T-Shank
Strokes per minute	3000
Stroke Length	1 inch
Bevel Capacity	45 degrees

Summary

General Safety Rules

Work Area

Electrical Safety

Guidelines for battery packs, chargers, and cords for safe electrical operation.

Personal Safety

Stay alert, dress properly, avoid accidental starting, and use common sense.

Tool Use and Care

Proper handling, maintenance, and safety precautions for tool operation.

Specific Safety Rules

Additional Safety Rules

Know your tool, wear safety glasses, and follow battery tool precautions.

Important Rules for Battery Tools

Handle battery tools carefully, avoid heat, and charge properly.

Important Safety Instructions for Charger

Specifications

Features

Lock-Off Button

Adjustments

To Install Blades

Step-by-step instructions for inserting and securing saw blades.

Operation

Charging Batteries

Instructions for charging the battery pack, including status lights and times.

Recharging Hot Batteries

Installing the Battery Pack

Step-by-step instructions for attaching the battery pack to the tool.

Removing the Battery Pack

General Cutting

Do Not Force Your Saw

Orbital Motion

Straight Cut

Scroll Cutting

Angle Cutting (Bevel Cutting)

Adjusting the base for bevel cuts from 0° to 45°.

Plunge Cutting

Splinter-Free Cutting

Maintenance

Batteries

Customer Service Information