MAINTENANCE SCHEDULE
Every 25
hours of
operation
Before
each use
After rst
month or
20 hours of
operation
Every 3
months or
50 hours of
operation
Every 6
months or
100 hours of
operation
Every year
or after 300
hours of
operation
Check if fastener is
fully tightened
■
Check: Cutting
attachment must not
rotate in dle mode
2
■
Clean spark arrestor
■
Replace spark arrestor
■
Clean air lter
■
Change air lter
■
Check or adjust spark
plug
■
Replace spark plug
■
Clean fuel tank and
filter
1
■
Check fuel hose
■
Replace fuel filter
1
■
Check all hose
connections
■
Inspect fuel tank vapor
vent (if equipped)
■
Clean the exhaust port
and silencer
■
1 These items should only be carried out by an authorised service centre.
2 If this requirement is not met, contact an authorised service centre for repair or adjustment.
NOTES:
■ Maintenance should be performed more frequently when product is used in dusty areas.
■ When product has exceeded the maximum figures specified in the table, maintenance should still be cycled according to the intervals of
time or hours stated herein.
To Next Page
Loading...
Need help?
General
