User Manual
25
User Manual
26
5. Aim the terminals on the straight plug to the holes of the grommet, and then
compress them together.
6. Finally, connect the straight plug to the AC terminal on inverter. Pay
attention to the polarity of the terminals to avoid wrong connecting.
6.4 DC SIDE CONNECTION
The cable length on DC side should not exceed 30 m.
Figure 6.6
Figure 6.7
To do this , the insulated earthing conductor must be 5mm longer than the
insulated L and N conductors! L and N must not be swapped.The ground wire
shall be larger than phase conductor.
Sununo-TL1.5K/2K
Sununo-TL 3KB/4KB
Sununo-TL3KA/4KA/5K
NO T E :
To Next Page
Loading...
Need help?
General
