Samson C-que 8 User Manual

ENGLISH
11

Virtually all headphones that terminate in a stereo 1/4" plug can be used with the C•que 8 Headphone Amplifier. This
chart provides a partial listing of some of the more popular models, along with their impedance and sensitivity ratings.
As described on page 7 of this manual, headphones with lower impedances (or higher sensitivity) will sound louder as
compared to other, higher impedance (or lower sensitivity) headphones at the same channel Volume setting. Samson
Technologies has no connection with any of these manufacturers, nor do we endorse any particular models for use with
the C•que 8. This is simply a reference listing for your convenience. For more information about any of these headphones,
contact the manufacturer directly.

SAMSON HEADPHONES
Model Impedance Sensitivity /mW
PH60 32 ohm 100 dB
RH100 64 ohm 106 dB
RH300 32 ohm 106 dB
RH600 40 ohm 106 dB
CH70 32 ohm 103 dB
CH700 64 ohm 108 dB
OTHER MANUFACTURER'S HEADPHONES
Manufacturer Model Impedance Sensitivity /mW
AKG K-141 600 ohm 98 dB
AKG K-240 600 ohm 88 dB
Beyer DT-150 250 ohm 114 dB
Beyer DT-801 250 ohm 114 dB
Fostex T-10 50 ohm 91 dB
Fostex T-20 50 ohm 96 dB
Fostex T-40 50 ohm 98 dB
Sennheiser HD-450 (original) 70 ohm 94 dB
Sennheiser HD-450 Series II 60 ohm 94 dB
Sony MDR-7502 45 ohm 100 dB
Sony MDR-7504 45 ohm 103 dB
Sony MDR-7506 63 ohm 106 dB

Samson C-que 8 Specifications

General

Brand	Samson
Model	C-que 8
Category	Amplifier
Language	English