021
Starting the recording mode
How to use the Smart Auto mode( )
Selecting modes
You can select the shooting modes by using the MENU button on the
back of your camera.
Ê
How to use the MENU button
1. Press the MENU button and a menu will
be displayed.
2. Press the Up / Down button to select the
[Mode] menu and press the Right button.
3. Select a desired mode by pressing the
Up / Down button and then press the OK
button.
The camera automatically chooses the appropriate camera settings
based on a detected type of scene. It will be helpful if you are not
familiar with the camera settings for various scenes.
1. Insert the battery (p.15). Insert the
battery taking note of the polarity
(+ / -).
2. Insert the memory card (p.15). As this
camera has a 7.5MB internal memory,
you do not need to insert the memory
card. If the memory card is not inserted,
an image will be stored on the internal memory.
If the memory card is inserted, an image will be stored on the
memory card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera.
5. Select the Smart Auto mode by pressing the MENU button.
6. Point the camera towards the subject and compose the image by
using the LCD monitor.
7. Press the Shutter button to capture an image.
Shooting
Sound
Display
Settings
Program
DIS
Exit Change
Photo Help...
Scene
Movie
Smart Auto
Mode
Program
DIS
Photo Help Guide
Scene
Movie
Smart Auto
Exit Back
Program
DIS
Photo Help Guide
Scene
Movie
Smart Auto
Exit Back
Program
DIS
Photo Help Guide
Scene
Movie
Smart Auto
Exit Back
To Next Page
Loading...
Need help?
General
Weight and Dimensions
