057
Settings ( )
Setting the USB
If the camera fails to automatically connect with a PC or a printer using
a USB cable, you can manually set [Computer] or [Printer].
- [USB] sub menus:
[Auto]* : Automatically enables an
external device connected with
a USB cable.
[Computer] : Sets computer connection
mode if the connected external
device cannot be recognized
automatically.
[Printer] : Sets printer connection mode if the connected external
device cannot be recognized automatically.
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland,
Germany, U.K., Holland, Italy, Kuwait, Malaysia,
New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway etc.
- When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
- There will be digital noise on the external monitor, but it is not a
malfunction.
- If the image is not in the center of the screen, use the TV controls
to center it.
- When the camera is connected to an external monitor, some parts
of the image may not be displayed.
- When the camera is connected to an external monitor, the menu
will be visible on the external monitor and the menu functions are
the same as those indicated on the LCD monitor.
Back Set
Video Out :NTSC
USB :Auto
AF Lamp :On
Auto
Computer
Printer
To Next Page
Loading...
Need help?
General
Weight and Dimensions
