Samsung Galaxy Tab Active3 User Manual

Settings
159
Data saver
Reduce your data usage by preventing some apps running in the background from sending
or receiving data.
On the Settings screen, tap Connections
→
Data usage
→
Data saver and tap the switch to
activate it.
When the data saver feature is activated, the icon will appear on the status bar.
Data saver feature activated
To select apps to use data without restriction, tap Allow app while Data saver on and
select apps.
Mobile data only apps
Select apps to always use the mobile data even when your device is connected to a Wi-Fi
network.
For example, you can set the device to use only mobile data for apps that you want to keep
secure or streaming apps that can be disconnected. Even if you do not deactivate the Wi-Fi
feature, the apps will launch using the mobile data.
On the Settings screen, tap Connections
→
Data usage
→
Mobile data only apps , tap the
switch to activate it, and then tap the switches next to the apps you want.
You may incur additional charges when using this feature.

Samsung Galaxy Tab Active3 Specifications

General

Display Size	8.0 inches
Resolution	1920 x 1200 pixels
Display Type	TFT LCD
Processor	Exynos 9810
CPU	Octa-core (4x2.7 GHz Mongoose M3 & 4x1.7 GHz Cortex-A55)
GPU	Mali-G72 MP18
RAM	4 GB
Rear Camera	13 MP, f/1.9, AF
Front Camera	5 MP, f/2.2
Battery Capacity	5050 mAh, removable
Operating System	Android 10, upgradable to Android 12
Rugged Features	MIL-STD-810H compliant
Dimensions	213.8 x 126.8 x 9.9 mm (8.42 x 4.99 x 0.39 in)
S Pen Support	Yes
Sensors	Accelerometer, gyro, proximity, compass, barometer
Protection	IP68 dust/water resistant
SIM	Nano-SIM
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0
Storage Options	64GB