Samsung Galaxy Tab Active3 User Manual

Basics
30
Transferring data from your previous device
(Smart Switch)
You can use Smart Switch to transfer data from your previous device to your new device.
Launch the Settings app and tap Accounts and backup
→
Smart Switch .
•
This feature may not be supported on some devices or computers.
•
Limitations apply. Visit www.samsung.com/smartswitch for details. Samsung
takes copyright seriously. Only transfer content that you own or have the right to
transfer.
Transferring data wirelessly
Transfer data from your previous device to your device wirelessly via Wi-Fi Direct.
1
On the previous device, launch Smart Switch .
If you do not have the app, download it from Galaxy Store or Play Store .
2
On your device, launch the Settings app and tap Accounts and backup
→
Smart
Switch .
3
Place the devices near each other.
4
On the previous device, tap Send data
→
Wireless .
5
On the previous device, tap Allow .
6
On your device, select an item to receive and tap Transfer .
7
Follow the on-screen instructions to transfer data from your previous device.
After the data is done transferring, you can view a list of the transferred data on your
device.

Samsung Galaxy Tab Active3 Specifications

General

Display Size	8.0 inches
Resolution	1920 x 1200 pixels
Display Type	TFT LCD
Processor	Exynos 9810
CPU	Octa-core (4x2.7 GHz Mongoose M3 & 4x1.7 GHz Cortex-A55)
GPU	Mali-G72 MP18
RAM	4 GB
Rear Camera	13 MP, f/1.9, AF
Front Camera	5 MP, f/2.2
Battery Capacity	5050 mAh, removable
Operating System	Android 10, upgradable to Android 12
Rugged Features	MIL-STD-810H compliant
Dimensions	213.8 x 126.8 x 9.9 mm (8.42 x 4.99 x 0.39 in)
S Pen Support	Yes
Sensors	Accelerometer, gyro, proximity, compass, barometer
Protection	IP68 dust/water resistant
SIM	Nano-SIM
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0
Storage Options	64GB