Using the LED LIGHT (SC-DC165 only)
The LED LIGHT function works only in Camera Mode.
page 26
The LED LIGHT enables you to record a subject in dark places.
The LED LIGHT can be used with Color Nite function only.
1. Set the
[Mode] switch to [DISC].
2. Set the
[Power] switch to [ (Camera)].
3. Press the
[C.NITE/LED LIGHT] button until <Color N. 1/15( )> appears.
Danger
The LED LIGHT can become extremely hot.
Do not touch it while in operation or soon after turning it off, otherwise serious injury may
result.
Do not place the DVD Camcorder into the carrying case immediately after using the LED
LIGHT, since it remains extremely hot for some time.
Do not use near flammable or explosive materials.
Note
The range of the LED LIGHT is limited. (up to 6.6ft (2m))
DVD Camcorder: Basic Recording
To Next Page
Loading...
Need help?
General