Samsung UE46B6000VW User Manual

English - 44
Troubleshooting for Anynet
+
Problem Possible Solution
Anynet
+
does not work. Check if the device is an Anynet
+
device. The Anynet
+
system supports Anynet
+
devices only.
Connect only one receiver (home theatre).
Check if the Anynet
+
device power cord is properly connected.
Check the Anynet
+
device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet
+
exclusive remote control.
Anynet
+
doesn’t work in certain situations. (Searching channels, Operating Media Play, Plug &
Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or
turn your TV off and on again.
Check if the Anynet
+
Function of Anynet
+
device is set on.
●
●
●
●
●
●
●
●
●
●
I want to start Anynet
+
. Check if the Anynet+ device is properly connected to the TV and check if the Anynet
+
(HDMI-
CEC) is set to On in the Anynet
+
Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to
show the Anynet
+
menu and select a menu you want.
●
●
I want to exit Anynet
+
. Select View TV in the Anynet
+
menu.
Press the SOURCE button on the TV remote control and select a device other than Anynet
+
devices.
Press P > / < , PRE-CH and FAV.CH to change the TV mode. (Note that the channel button
operates only when a tuner-embedded Anynet
+
device is not connected.)
●
●
●
The message
‘Connecting to Anynet+
device...’ appears on the
screen.
You cannot use the remote control when you are configuring Anynet
+
or switching to a view
mode.
Use the remote control when the Anynet
+
setting or switching to view mode is complete.
●
●
The Anynet
+
device does
not play.
You cannot use the play function when Plug & Play is in progress. ●
The connected device is
not displayed.
Check whether or not the device supports Anynet
+
functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
Search Anynet
+
devices again.
You can connect an Anynet
+
device using the HDMI 1.3 cable only. Some HDMI cables may not
support Anynet
+
functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord
or a power failure, please repeat the device scan.
●
●
●
●
●
●
The TV programme
cannot be recorded.
Check whether the antenna jack on the recording device is properly connected. ●
The TV sound is not
output through the
receiver.
Connect the optical cable between TV and the receiver. ●
¦
Book-01968C.indb 44 2009-03-02 �� 3:20:15

Samsung UE46B6000VW Specifications

General

Display diagonal	46 \
Native aspect ratio	16:9
Native refresh rate	60 Hz
Product color	Black
Auto channel search	Yes
Audio system	SRS Trusurround HD/ Dolby Digital+
RMS rated power	20 W
Number of speakers	2
HDMI ports quantity	4
USB 2.0 ports quantity	1
Package weight	28300 g
Power consumption (standby)	0.1 W
Power consumption (typical)	105 W
Power requirements	220 - 240V, 50/ 60Hz

Weight and Dimensions

Depth (with stand)	275 mm
Height (with stand)	763 mm
Weight (with stand)	22400 g
Depth (without stand)	29.9 mm
Width (without stand)	1115 mm
Height (without stand)	705 mm
Weight (without stand)	17600 g