Sanyo 14MT2 User Manual

Up to 100 broadcast channels in your reception area can be
stored in the electronic memory.
There
are
three
modes
of
pre-setting
channels
as
follows:
@ Automatic tuning/sorting
All
receivable
channels
are
found
and
stored
automatically,
and
the
specified
6
major
stations
in
the
UK
are
sorted
to
programme
positions
1
to
6.
@ Semi-automatic presetting
Used to preset a receivable channel in any desired
programme position.
@ Manual presetting
Manually
tune
a
channel
if it
cannot
be
automatically
tuned,
such
as
when
the
signal
is
poor.
The presetting of this TV set can be performed by using
the control buttons on the remote control handset.
tS To select the presetting mode, press the F[.] button
repeatedly until the word "PRESET NO/YES appears on
the screen, next select "YES" by pressing the «+
button, and then press the FL.) button. The
presetting mode screen display appears.
Each time the F(.) button is pressed, the tuning mode will
change as illustrated.
if you select "YES" but do not press the FL.) button within
9 seconds, the mode automatically changes to the normal
TV mode.
On-Screen Display in the Presetting mode
*, Programme position: 0-99
Tuning Bar

Sanyo 14MT2 Specifications

General

Brand	Sanyo
Model	14MT2
Category	TV
Language	English