Sanyo 14MT2 User Manual

@ Battery Installation
@ Aerial Connection
* For Model 14MT2 only
1 Remove the battery cover by sliding it in direction of the
arrow.
2 Instail two “AA” 1.5 volt batteries so that the “+"“ and “-”
marks on the batteries match the “+” and “-” marks inside
the unit.
3 Close the battery cover.
# Replace the batteries when the TV set is showing the
following symptoms: Operation is unsteady or erratic,
sometimes the TV does not work with the transmitter.
Discharged batteries may leak and damage the unit. The
normal life of batteries should be from nine to ten months.
t= The aerial socket is located on the back of the TV set.
@
For
all
aerial
problems
please
consult
your
local
dealer.
@
For
the
connection
to
the
peripheral
AV
equipment,
refer
to
section
"Connection
of AV
equipment"
on
page
22.
@ Loop aerial use (model 14MT2 only)
f= Connect the aerial adaptor and the feeder cable. (the aerial
adaptor and loop aerial are supplied parts.)
cS Insert an aerial adaptor tightly into aerial socket on the
back of the TV set.

Sanyo 14MT2 Specifications

General

Brand	Sanyo
Model	14MT2
Category	TV
Language	English