Sanyo 14MT2 User Manual

@ Mains On/Off
@
To
switch
On/Off
with
Remote
Control
Handset
™ To turn the TV set ON, press the Mains ON/OFF © switch
on the front of the TV.
The power indicator illuminates red to show the power is on.
@ To turn the TV set OFF, press the Mains ON/OFF (@)
switch again.
If no picture appears but the power indicator is on, press the
() PA, PY, or 0 - 9 button as the TV set is in the standby
mode.
™@ To switch the TV set into the standby mode, press the (')
button.
The red power indicator illuminates more brightly.
lM To switch the TV set ON from the standby mode, press any
of the following buttons;
(‘), PA, P ¥V buttons, 0 - 9 Numeric buttons .
lf you found a power indicator flashing, please turn
e TV set off completely with the Mains ON/OFF
o switch and contact our service desk. This
warning is a sign to let you know that the power
rotection function of this TV set is now operating.
@# Mains ON/OFF © switch must be in the ON position
before using the remote control handset.
@
Standby
mode
is
used
for
switching
the
TV
set
off
for
short periods of time. In standby mode the TV is switched
off but is still receiving mains power.
Temeesecewonscrcascocsoveusceccceveeseeseoeesucesenesaseneesaeaneaesneseeeserwaneesenansteaeeaeee
ee
eheNeaeEn
ENR
ONOSEEEaEOD
EEE
P
OLE
OE
DEED
ELON
ELU
LOSERS
DESEO
D
EDEL
ESSE
HONOR
ERED
OLEESOOESEODELOSEDONSEEE
RESO
SEEN
HOSE
OEESeEoEaeRecececoNeoESeSeseoEooresestencecearecs
@ Auto Shut Off
This
TV
set
will
automatically
switch
into
the
standby
mode,
10
-00
-
minutes
after
a
signal
is
no
ionger
received.
The
time
until
the
Stand-by
coccce
le
set
will
switch
off
is
displayed
on
the
screen.
©
\f
the
aerial
is
removed
the
TV
set
will
automatically
switch
into
the
standby
mode
after
10
minutes.
@
When
the
TV
set
is
switched
on
by
using
the
On-timer
function with no signal being received, the auto-shut off
function will be ignored.

Sanyo 14MT2 Specifications

General

Brand	Sanyo
Model	14MT2
Category	TV
Language	English