Sanyo 14MT2 User Manual

m NO PICTURE, NO SOUND
@ Check if TV is plugged in.
@ Try a different channel, if OK,
probably station trouble.
m POOR PICTURE, SOUND OK
@ Adjust BRIGHTNESS control.
@ Adjust FINE TUNING control.
é d @ Check aerial connections
@ NO COLOUR, PICTURE OK
@ Adjust COLOUR control.
@ Adjust FINE TUNING control.
@ |s the programme in colour ?
Your television is fully transistorised
and does not contain any user
serviceable components.
Removal of the cabinet cover may
expose you to dangerous voltages.
Refer all servicing to qualified service
personnel.
Unplug the television receiver from the
wall outlet and refer servicing to
qualified service personnel under the
iol feh ii iare mereyaleli (relates
™ If the power cord or plug is damaged.
if liquid has been spilled into the television receiver.
Ml
|f
television
receiver
has
been
exposed
to
rain
or
water.
Ml if the television receiver has been dropped or the cabinet
has been damaged.
Mm
If
the
television
receiver
exhibits
a
distinct
change
in
performance.
W@
If
the
television
receiver
does
not
operate
normally
by
following the operating instructions.
Adjust
only
those
controls
that
are
covered
in
the
operating
instructions
as
improper
adjustment
of
other
controls
may
result
in
damage.
This
will
often
require
extensive
work
by
a
qualified
technician
to
restore
the
television receiver to normal operation.
@ WEAK PICTURE
@ Check aerial connections on back
of set.
@ Check aerial for broken wires.
@ Re-orient aerial.
H The following faults are not
caused by the receiver:
When replacement parts are required, have the service
technician verify that the replacements he uses have the
same safety characteristics as the original parts. Use of
manufacturers specified replacements can prevent fire,
shock or other hazards.
"GHOSTS"
Reflections of signals from mount-
ains or high buildings will cause
multiple images, called "Ghosts".
These abnormal conditions can be
reduced to minimum by repositioning
aerial or by installing a new one
suited for your area.
"INTERFERENCE"
Interference may be caused by
electrical appliances, car ignition
systems, etc. This should normally
be a temporary condition, but should
this interference persist, contact your
dealer.
25

Sanyo 14MT2 Specifications

General

Brand	Sanyo
Model	14MT2
Category	TV
Language	English