- 8 -
DRY CARE Course:
Turn on the power switch (ON/ OFF).
Load the laundry into the washer.
Press ONE TOUCH SELECT to select the Dry Care course.
Press the START/ PAUSE button.
W
ater is supplied to MED level.
Depending on the volume of laundry, for best results,
use LOW2, HIGH water level.
Pulsator will rotate and select the suitable water flow
responding to DRY CARE course.
After water level reaches reset point, draining c
ourse
continues for 1 40
Water is supplied to the selected water level.
Intermittent spin cycle:1 10 ON.
Continuous spin cycle: 50 ON.
During spinning if unbalance condition occurs, safety
switch will activate.
Water is supplied to MED level.
Overflow r
inse: Twice overflow.
After water level reaches reset point, draining
continues 1 40 .
Intermittent spin cycle: 1 10 ON.
Continuous spin cycle: 50 ON.
During spinning if unbalance condition occurs, safety
switch will activate.
The safety device ac
tivation and load automatically adjusting program:
During Spin
-
Dry cycle in Rinse process or Spin process, if the safety device works, the washer will
automatically stop Spin
-
Dry cycle and adjust the balance of wash load.
To Next Page
Loading...
Need help?
General
