LO
I
DX button, Radio mode select button, Presetting stations
i!
-.
0
8
2.
Radio mode select button
-
LO
/
DX button
Preset buttons
LO
/
DX button (Selecting seek sensitivity of Auto tuning)
Press the LO
/
DX button (
G
) for 1.5 seconds or more to select the desired seek
sensitivity.
With each press, [DX] indicator appears and disappears.
To receive local stations with strong signals, make the [DX] indicator disappear.
To receive distant stations with weaker signals, make the [DX] indicator appear.
3 Radio mode select button
Press the Radio mode select button (
4
) to switch immediately to Radio mode
L-J
from other mode (CD, Changer, Power off mode).
Presetting stations
. . . . . . . . . . . There are 2 types as follows.
~
.
.
.
.
.
6 stations can be preset on each band (FM1 , FM2, AM).
How to preset
1.
Select the desired band (FM1 , FM2, AM) and tune to the station to be
memo-
rized.
2. Press the desired preset button for 1.5 seconds or more.
3. To preset additional stations, repeat procedure 1 and 2.
How to recall
Select the desired band and press the desired preset button.
~~~~~~~~~~~~~~~~~.........The unit will scan the selected band (FM or AM) and
memorize the 6 strongest stations.
How to preset
1. Select the desired band (FM or AM).
2. Press the Auto travel preset button (
a
)
until1
the [
-
-
-1
indicator appears
(for about 1.5 seconds). The indicator [ATP] will flash on and off. The unit will
scan the band for the strongest 6 stations and automatically memorize them.
Scanning will stop and the first memorized station will be heard.
Notes:
l
If all stations are weak, none may be memorized. If this should occur,
[OOO]
will
appear on the display. The station received last will be selected.
l
If there are fewer than 6 receivable stations, the unit will memorize all the receiv-
able stations, then the first memorized station will be selected.
15
To Next Page
Loading...
Need help?
General
