English -19-
Band
Band can be selected either “C” or “S” by press“ ” /
“ button.
Channel
Channel can be changed by “ ” / “ ” button or Digit
Buttons.
Colour System
By pressing
/
button, select Colour System.
Press “ ” / “ ” button to change the colour system
to PAL, SECAM, PAL60 orAUTO.
If Sound System is setto I, SECAM is not available for
the Colour System.
Note: In EXT mode, you can choose NTSC 3.58 and
NTSC 4.43 as well.
Sound System
By pressing
/
button, select Sound System.
Press “ ” / “ ” button to change the sound system
to BG, I, L, L’, DK.
Fine Tune
By pressing
/
button, select Fine Tune. Press
“ ” / “ ” button to adjust the tuning.
Search
By pressing
/
button, select Search. Press “ ”
/ “ ” button to start program searching.You can also
enterthedesiredfrequencyviadigitbuttonswhensearch
item is highlighted.
Store
By pressing
/
button, select Store. Press “ ”or
“OK”buttonto store theadjustments. “Stored...” will be
displayed on the screen.
Install menu in AV modes
The following screen appears in the install menu:
Colour System
VCR
Store
Colour System
By pressing
/
select Colour System. By press-
ing “ ” / “ ” button, you can change the colour
system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC
3,58 or AUTO.
VCR
By pressing
/
select VCR. By pressing “ ” /
“ ” button, you can set the VCR to ON or OFF..
Store
By pressing
/
button, select Store. Press
“ ”or “OK” button to storethe adjustments. “Stored...”
will be displayed on the screen.
Source menu
By pressing “ ” / “ ” button, select the fifth icon.
Source menu appears on the screen.
SOURCE
TV
EXT-1
EXT-2
EXT-2 S
DTV
In source menu, highlight a source by pressing
/
button and switch to that mode by pressing “ ”
or “OK” button. Source options are; TV, DTV, EXT-1,
EXT-2,EXT-2S,FAV,S-VIDEO,HDMI-1,HDMI-2,YPBPR
andPC.
Note: You can mark desired source options by press-
ing OK button. Therefore, when
AV
button is pressed,
only the marked source options will be available.
ENG-32781W-1050UK-32 INCH 17MB22 UK IDTV-(2 HDMI-WO PIP-SPDIF)-50104961.p65 04.04.2007, 16:5919