Sanyo CP14SE1 User Manual

7
T
T
uning of the Channels / Private Position
uning of the Channels / Private Position
8
Press the MENU button to return to normal TV display.
7
Once desired channel is located, select “MEMORY” by
pressing the Programme UP or DOWN button.
The VOLUME + button will move tuning toward the
higher frequencies, and the VOLUME - button will
move tuning toward the lower frequencies.
6
Press the VOLUME + or - button to enter the desired
channel into Programme Position 6.
To pre-set other Programme Positions, repeat steps 5 - 8.
SYSTEM
POSITION
6
AUTO
MODE
MANUAL
SEARCH
SYSTEM
AUTO
SKIP
OFF
SIF
BG
SELECT ADJUST BACK
P
P
M
EXIT
MEMORY
OK
Channels Swapping
Use this channel swapping feature to swap the channels
between two stored programme position. This feature is par-
ticularly useful after automatic tuning.
1
Select programme position “6”.
2
Press the SWAP button.
For example, to swap the channel between programme
position “6” and programme position “12”.
SWAP 6 AND -
The two TV channels will now have changed
places.
3
Press the DIGIT button, “ 1 “ button and then “ 2 ”
button on the remote control to enter programme
number 12. (For example, to enter programme
number “ 3 “, press “ 3 ” button only. )
4
Press the SWAP button.
SWAP 6 AND 12
1
Enter to SEMI-AUTO or MANUAL tuning mode.
2
Select “POSITION” with the Programme UP or
DOWN button.
When there is a position you do not use, Position 4 for
example, by setting the SKIP Channel function it is possi-
ble to jump over this position, when you are selecting a
channel using the Programme UP/DOWN or CHANNEL
SCAN button.
For example, to set programme position “4” as Skip
channel ;
3
Press remote control “4” button to select Programme
Position 4. Use the DIGIT button and Programme
Selector (Number buttons) to enter Programme
Number. Do not use the VOLUME + or
- button to
enter programme position in this settings.
Skip Channel Set and Cancel
6
Press the MENU button to return to normal TV display.
4
Select “SKIP” by pressing the Programme UP or
DOWN button, then press the VOLUME + or
-
button to set SKIP to ON. To cancel Skip Channel
function, set to OFF.
5
Select “MEMORY” by pressing the Programme UP
or DOWN button, then press the VOLUME + or
-
button for memory.
Any number of channels maybe set as Skip Channels.
SYSTEM
AUTO
O
SIF
BG
POSITION
4
SKIP
ON
For example, to set the programme position “15” as
the private position.
1
Select programme position “15”.
2
Press and hold the RECALL/COLOUR SYSTEM
button for more than 2 seconds.
The programme number “15” will shift to centre of the
screen.
The picture will disappear, and “ 15” will be display on
the screen.
3
Press the MENU button.
Private position is used to restrict of programme
positions that you do not want others to watch. Any
position can be set as the Private position.
15
AUTO
BG
15
15
AUTO
BG
How to Set the Private Position
Private Position
INST.BB2V 8/19/06 4:02 PM Page 7

Sanyo CP14SE1 Specifications

General

Brand	Sanyo
Model	CP14SE1
Category	TV
Language	English