EasyManuals Logo
Home>Sanyo>Home Theater System>DWM-1000

Sanyo DWM-1000 Service Manual

Sanyo DWM-1000
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
- 1 -
SPECIFICATIONS
Main Speaker (magnetic shield)
Unit used: 10cm ( 4" diameter), Cone type
Maximum music power handling capacity: 60 Watts
Nominal impedance: 6 ohms
General
Power requirements: AC 120V, 60Hz (1000,US,CA)
AC 230V, 50Hz (XE,UK)
AC 230-240V,50Hz (AU)
AC 220V, 60Hz (KR)
Power consumption: 100 Watts
1.4W (standby mode)
Dimensions (W x H x D):Approx. 200(W) x 400(H) x 320(D) mm
Approx. 7.9" x 15.9" x 12.6"
Weight: :Approx.8.7 kg (19.4 lbs)
Main Speaker with Subwoofer (magnetic shield)
Main Speaker
Unit used: 10cm (4" diameter), Cone type
Maximum music power handling capacity: 60 Watts(peak)
Nominal impedance: 6 ohms
Subwoofer
Unit used: 13cm ( 5.1" diameter), Cone type
Maximum music power handling capacity: 60 Watts (peak)
Nominal impedance: 6 ohms
General
Dimensions (W x H x D): Approx 200(W) x 400(H) x 320(D) mm
Approx. 7.9" x 15.9" x 12.6"
Weight: Approx. 5.8 kg (13.2 lbs)
Main unit with Main Speaker
Amplifier Section
<US>
Main Amplifier
Continuous minimum sine wave RMS power output
per channel at 1kHz into 6 ohms with no more than
10 % total harmonic distortion ................ 30 Watts
Subwoofer Amplifier
Continuous minimum sine wave RMS power output at
100Hz into 6 ohms with no more than 10 % total
harmonic distortion ..................................... 30 Watts
General
Output power
Total power : 90W
Main Amplifier : 30 x 2 (at 6 ohms, 10% distortion)
Subwoofer Amplifier : 30W (st 6 ohms, 10% distortion)
Input level and impedance:
VIDEO: VIDEO IN : 1.0 Vp-p (75 ohms)
AUDIO IN (L/R): 600 mV/50k ohms
AUX/TV (L/R): 600 mV/50k ohms
Outputs:
MAIN SPEAKER (L/R): 6 ohms
SUBWOOFER: 6 ohms
PHONES:8-32 ohms (XE,UK,SS,KR,AU)
DIGITAL OUT: Optical
AV EURO CONNECTOR : For Euro-AV cable (XE,UK)
COMPONENT VIDEO OUT: CB/CR: 0.7 Vp-p (75 )
Y: 1.0 Vp-p (75 )
MONITOR VIDEO OUT: 1.0 Vp-p (75 ohms)
AUDIO OUT (L/R): 600 mV (1 kohms)
S-VIDEO OUT: Y: 1.0 Vp-p (75 ohms)NTSC
Y: 1.0 Vp-p (75 ohms)PAL
C: 0.286 Vp-p (75 ohms)NTSC
C: 0.3Vp-p (75 ohms)PAL
DVD Video Player Section
Type: DVD/CD player
Playback standard : PAL or NTSC
Laser: Semiconductor laser, wavelength 650 nm
Laser output (Continuous wave max.)
1mW (DVD)
0.5mW (CD)
Frequency range (digital audio):
4 Hz to 44 kHz (DVD fs: 96 kHz)
Signal to noise ratio: More than 105 dB
Harmonic distortion (digital audio): 0.003 %
Wow and flutter: Below measurable level
IMPORTANT INFORMATION
Because its products are subject to continuous improvement,
SANYO reserves the right to modify product designs and
specifications without notice and without incurring any obligation.
Specifications subject to change without notice.

Other manuals for Sanyo DWM-1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo DWM-1000 and is the answer not in the manual?

Sanyo DWM-1000 Specifications

General IconGeneral
BrandSanyo
ModelDWM-1000
CategoryHome Theater System
LanguageEnglish

Related product manuals