SCHEMATIC DIAGRAM (AMP for 1000,US,CA)
PRODUCT SAFETY
NOTICE
Each precaution in this manual
should be followed during
servicing. Components identified
with the IEC symbol
!
!!
in the
parts list and the schematic
diagram designated
components in which safety can
be of special significance. When
replacing a component identified
by
!
!!
, use only the replacement
parts designated, or parts with
the same ratings of resistance,
wattage or voltage that are
designated in the parts list in this
manual. Leakage-current or
resistance measurements must
be made to determine that
exposed parts are acceptably
insulated from the supply circuit
before returning the product to
the customer.
- 80 - - 81 -
This is a basic schematic diagram.
To Next Page
Loading...
Need help?
General
