16
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
ANALOG ANTENNA SIGNAL
(OPTIONAL)
Use this feature to switch between analog off-air
channels and analog cable channels.
1
Press the TUNER key to select analog channels.
2
Press the MENU key to display the Main menu.
3
Use the CURSOR keys to highlight (green) the
Analog Antenna Signal. Press ENTER.
4
Use the CURSOR keys to choose Cable or
VHF/ UHF. Press ENTER.
5
Press the EXIT key to return to normal TV viewing.
To Delete channels from the Channel Scan Memory
3
Use the CHANNEL (CH ) keys or numerical
0 ~ 9 keys to select desired channel. HINT: Press the
TUNER key to switch between Digital and Analog
Channel Scan memories.
4
Press the ENTER key to delete the channel. The
display will change to “deleted.”
NOTES:
“Delete?” will ap-
pear below the
channel number if
the selected chan-
nel is already in
the Channel Scan
Memory.
Use the number
keys to tune to
active channels not
in the Channel
Scan Memory list.
To Add a channel to the Channel Scan Memory
3
Use the numerical 0 ~ 9 keys to select the desired
channel number. “Add?” will appear below the
channel number.
4
Press the ENTER key to add the channel. The display
will change to “Added.”
When you have fin-
ished adding and/or
deleting channels,
press the EXIT key
to return to normal
TV viewing.
CHANNEL SCAN MEMORY
Channel Scan Memory is a list of active channels that you
can scan through using the Channel Scan CH (up) CH
(down) keys. This list can be customized by deleting
and/or adding channels.
1
Press the MENU key to display the Main menu.
2
Use the CURSOR keys to highlight (green)
Channel Scan Memory. Press ENTER.
When a digital channel is deleted, all of that channel’s sub-channels
are deleted as well.
Only previously deleted digital channels can be added back to the
Channel Scan Memory.
If one digital sub-channel is added back to the Channel Scan
Memory all of that channel’s sub-channels will be added back.
If the last remaining digital channel is deleted, the entire previous
Channel Scan Memory list will be restored automatically.
If the last remaining analog channel is deleted (cable or off-air
channel), ALL analog channels (cable or off-air) will be restored auto-
matically, regardless of the previous Analog Channel Scan Memory
list.
To Next Page
Loading...
Need help?
General
