20
OI-508-20EG
Operation without the Remote
Control Unit
If you have lost the remote control unit or it has trouble, follow the steps below.
1. When the air conditioner is not running
If you want to turn on the air conditioner, switch the operation selector to the
OFF position, and then to the ON position.
NOTE The set temperature and fan speed are automatically set at the last
selection before stopping.
2. When the air conditioner is running
If you want to turn off the air conditioner, switch the operation selector to the
OFF position.
Care and Cleaning
WARNING
1. For safety, be sure to turn the air conditioner off and also to disconnect
the power before cleaning.
2. Do not pour water on the indoor unit to clean it. This will damage the
internal components and cause an electric shock hazard.
Casing and Grille
(Indoor Unit)
Clean the casing and grille of the indoor unit with a vacuum cleaner brush,
or wipe them with a clean, soft cloth.
If these parts are stained, use a clean cloth moistened with a mild liquid
detergent. When cleaning the grille, be careful not to force the vanes out of
place.
CAUTION
1. Never use solvents, or harsh chemicals when cleaning the indoor unit.
Do not wipe the plastic casing using very hot water.
2. Some metal edges and the fins are sharp and may cause injury if handled
improperly; be especially careful when you clean these parts.
3. The internal coil and other components of the outdoor unit must be
cleaned every year. Consult your dealer or service center.
ON
OFF
TEST
INDOOR UNIT
Operation
selector
To Next Page
Loading...
Need help?
General
