23
OI-508-23EG
Care and Cleaning (continued)
Removing and remounting
the air intake grille
•
With the air intake grille open all
the way, grip both arms with
your hands and pull toward you
to remove.
To remount, hold the air intake
grille roughly horizontal and
push it in until the arm shafts fit
into the indentations in the main
unit, then fit the grille into place.
CAUTION When using a footstool or the like, be careful not to let it tip over.
Washing the grille with
water
•
Clean the grille gently using a soft sponge, or the like. Then wipe away any
remaining moisture.
•
Neutral detergent may be used to remove stubborn dirt. Then rinse thoroughly
with water and wipe away any remaining moisture.
Tips for Energy Saving
Do not
•
Block the air intake and outlet of the unit. If they are obstructed, the
unit will not work well, and may be damaged.
•
Let direct sunlight into the room. Use sunshades, blinds or curtains. If
the walls and ceiling of the room are warmed by the sun, it will take
longer to cool the room.
Do
•
Always try to keep the air filter clean. (Refer to “Care and Cleaning“.)
A clogged filter will impair the performance of the unit.
•
To prevent conditioned air from escaping, keep windows, doors and any
other openings closed.
Air intake grille
Arm
To Next Page
Loading...
Need help?
General
