Sanyo PLC-SU51 User Manual

24
Basic Operation
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the projected picture focus.
Zoom Lever
Focus Ring
Auto Setup Function
Auto Set Up function is provided to automatically correct Keystone
distortion according to the projector's tilt and adjust the computer
display parameters (Fine sync, Total dots and Picture position) by
just pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control. The operational setup for
the Auto Setup can be changed in the Setting menu.
Refer to p42 on setting of the Auto Setup function.
✔Note:.
• Auto Keystone corrects vertical distortion only, not correct horizontal distortion.
•Auto Keystone cannot work when Ceiling feature is On in the Setting menu. (p44)
• Perfect correction of the image distortion cannot be ensured with the Auto Setup
function. If the distortion cannot be corrected properly by pressing the AUTO
SETUP/ AUTO SET button, adjust manually by pressing the KEYSTONE button on
the remote control or selecting Keystone in the Setting menu. (p25, 42)
ON - OFF
POWER
AUTO SET UP
INPUT
WAR
N
L
A
RE
P
SELECT
MENU
V
O
L
U
M
E
–
V
O
L
U
M
E
+
Top Control
AUTO SETUP button
AUTO SET button
Remote Control
Zoom and Focus Adjustment

Sanyo PLC-SU51 Specifications

General

Brand	Sanyo
Model	PLC-SU51
Category	Projector
Language	English