Video Input
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the AV System Menu icon.
Video System Selection
Press the Point ed buttons to move the red arrow
pointer to the system that you want to select and
then press the SELECT button.
1
2
If the projector cannot reproduce proper video image,
it is necessary to select a specific broadcast signal
format among PAL, SECAM, NTSC, NTSC 4.43,
PAL-M, and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects incoming video
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image,
it is necessary to select a specific component video
signal format among 480i, 575i, 480p, 575p, 720p,
1035i, and 1080i.
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
Auto
Auto
AV System Menu (Video or S-Video)
AV System Menu (Component)
Move the pointer to a
system and press the
SELECT button.
AV System Menu icon
Selected system is
displayed.
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.
✔ Note:
The AV System Menu cannot be selected when
selecting RGB (Scart).
To Next Page
Loading...
Need help?
General
