Sanyo PLV-Z1 User Manual

-21-
■ Electrical Adjustment
Normal Mode Service Mode
"MENU"
"INPUT"
"POWER
ON/OFF"
Adjustment item Adjustment deta value
Service Mode
"Point Up / Down"
13710
Computer
"Point Left / Right"
Service Mode
13710
Computer
■ SERVICE ADJUSTMENT MENU OPERATION
■ To enter service mode
To enter service mode press the "MENU" and "IINPUT"
buttons on the projector simultaneously and hold for 2
seconds. As shown in a figure, a service mode display
appears on a screen.
■ Adjustment
Adjust service data using the following control buttons.
1. "POINT UP" ------- An item number increases.
2. "POINT DOWN" -- An item number decreases.
3. "POINT RIGHT" -- An adjustment value increases.
4. "POINT LEFT" ---- An adjustment value decreases.
■ To exit service mode
Press the "POWER on/off" button only once on the projec-
tor or remote control unit to quit the service mode.
TPB1
TPG1
TPR1
■ LOCATION OF TEST POINT
ASSY PWB MAIN

Sanyo PLV-Z1 Specifications

General

Brand	Sanyo
Model	PLV-Z1
Category	Projector
Language	English