Sanyo VM-EX25P User Manual

RECORDING BASIC STEPS
Installing the tripod
A:
To
remove
the
lens
cap,
press
on
both
sides,
as
Align
the
tripod
mounting
screw
with
the
tripod
mounting
illustrated.
hole
in
the
bottom
of
the
unit.
Then,
securely
tighten
the
mounting
screw.
Holding the camcorder
A: Keep your feet slightly apart, and the upper arms close
to the body. Hold the camcorder horizontally. When
possible rest your elbows on a table, or your back on a
B: To prevent losing the lens cap, attach it to the wall, etc. for more stability.
camcorder using the cord. B: Raise the viewfinder, for a comfortable low angle
recording position.
C: Use a tripod for jitter-free pictures.
A fia.
Adjusting the grip belt
Adjust the grip belt as illustrated, so that it is tight around
the hand when the REC START/STOP button and the
power zoom button are reached with the tip of the fingers.
Eyesight compensation ring
Turn the camcorder on, then while looking into the
viewfinder turn the ring (A), to the right or to the left, to
obtain the clearest possible picture.
Installing the shoulder belt
Install the shoulder belt as illustrated.
1 = 2
°
TA
)
4

Sanyo VM-EX25P Specifications

General

Brand	Sanyo
Model	VM-EX25P
Category	Camcorder
Language	English