EN-62
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing
the power switch.
2. Press the four-way controller (X) to select the [Set-up2] menu,
then use the four-way controller (T) to select [USB Mode].
3. Press the button.
4. Use the four-way controller (ST) to select [PC CAM], then press
the button.
5. Connect your camera and the computer via the supplied USB
cable.
6. Position the digital camera steadily on top of your computer
monitor or use a tripod.
USB Mode
Select :
Select :
PC
PictBridge
PictBridge
PC CAM.
PC CAM.
USB Mode
PC
Cancel : MENU
Cancel : MENU
To Next Page
Loading...
Need help?
General
