EN-80
APPENDIX
Troubleshooting Guide
Symptom Possible causes Solutions / Corrective Actions
Power does not turn
on.
* The batteries have run out.
* The batteries are not oriented correctly.
* The battery cover is not closed properly.
* The AC adapter (optional) is
disconnected.
* Load new or fully charged batteries.
* Load the batteries in the correct
direction.
* Close the battery cover correctly.
* Properly connect the AC adapter.
Camera suddenly
powers down.
* The function of [Auto Shut Down] in the
mode has been activated.
* The battery has run out.
* Turn the power back on and set the
option of [Auto Shut Down] to [Off].
* Load new or fully charged battery.
Image is not captured
when the shutter
release button is
pressed.
* The camera is in the or mode.
* Memory is full.
* Rotate the mode dial to , , ,
, , or .
* Transfer the desired files to your
computer and then delete
unnecessary files, or use a different
memory card.
To Next Page
Loading...
Need help?
General
