Sanyo Xacti VPC-HD2 User Manual

161 English
OTHER DEVICES AND CONNECTIONS
CONNECTING TO A TV
By connecting the camera to a TV, you can play back the recorded files on the
TV.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
Connecting to a standard video input terminal
* When connected, the images are not produced normally on the TV
monitor.
To AC adaptor
Yellow plug:
To Video Input terminal
Supplied dedicated
S-AV interface cable
i Insert the plug with the
[n] mark facing up.
USB/AV terminal
White plug:To Audio Input (L) terminal
Red plug: To Audio Input (R) terminal
Not connected*
Set the input to “VIDEO”.

Sanyo Xacti VPC-HD2 Specifications

General

Megapixel	10 MP
Sensor type	CCD
Image sensor size	1/2.5 \
Digital zoom	10 x
Digital SLR	No
Video capability	Yes
Camera shutter speed	1/30 - 1/10000 s
Focal length (35mm film equivalent)	38 - 380 mm
Flash modes	auto, Flash off, Red-eye reduction
Flash range (tele)	1 - 2.5 m
Flash range (wide)	0.35 - 2.5 m
Display diagonal	2.2 \
USB version	2.0
Product color	Gray
Compatible memory cards	sd
Focus adjustment	Auto

Weight and Dimensions

Depth	36 mm
Width	80 mm
Height	119 mm
Weight	210 g