satoh Buck S-470 User Manual

1. When using a rotary tiller in the field with many stones or stamps or
of hard soil, where a lot of shock will affect on, be sure not to
operate it at the 3rd PTO speed.
2. When using implements driven by PTO shaft be sure to refer to
implements manuals and operate them exactly as instructed.
NOTES: __________________________________________ __
1) When any implement is towed by the tractor, care should be taken
so that the universal joint does not form an angle more than 15°.
2) When the tractor is working with an impact load, correctly adjust
the slip clutch on the implement side or use the shear pin of proper
material so that the PTO is not overloaded.
3) To reduce the thrust load to the PTO driven shaft as much as
possible, it is advisable to test operation with an implement without
any load.
4) Lubricate the PTO driven shaft well.
5)
Avoid using a square-shaped drive shaft as much as possible.
6) Special care should be given to the yoke position so that the driven
shaft is well balanced.
Correct
Incorrect
4-WHEEL DRIVE SHIFT LEVER
The 4-wheel drive shift lever is located on the right of the clutch housing
and it should be operated in the similar manner to that for the machine
and PTO speed shift levers.
- 16-

satoh Buck S-470 Specifications

General

Brand	satoh
Model	Buck S-470
Category	Tractor
Language	English