satoh Buck S-470 User Manual

VALVE CLEARANCE ADJUSTMENT PROCEDURE
1.
The valve clearance should be checked with a cold engine and with
the piston at top dead center on the compression stroke.
The top dead center on the compression sHoke of No.1 piston can
be determined by the timing marks on the crank pulley and timing
gear case.
2.
Position the piston in No.1 cylinder at top dead center on compre-
ssion stroke and adjust its intake and exhaust valve clearance.
3. Then rotate the crankshaft 240 -deg. clockwise to move the piston
of No.3 cylinder to top dead center on compression stroke, and
adjust its valve clearance.
4. Then rotate the crankshaft 240 -deg. clockwise to move piston of
No.2 cylinder to top dead center on compression stroke, and adjust
its valve clearance.
COOLING SYSTEM
The cooling water must be soft water. Hose joints, radiator drain cock,
cylinder block drain cock, etc. should be tightened correctly so that no
water leakage will occur. Also confirm the correct tension of the fan belt.
The front of the radiator is provided with screen (optional) to prevent
dust from entering. After working in dusty places cleaning is required.
- 37-

satoh Buck S-470 Specifications

General

Brand	satoh
Model	Buck S-470
Category	Tractor
Language	English